git-annex(1)

NAME
git-annex - manage files with git, without checking their contents in

SYNOPSIS
git annex command [params ...]

DESCRIPTION
git-annex allows managing files with git, without checking the file contents into git. While that may seem paradoxical, it is useful when dealing with files larger than git can currently easily handle, whether due to limitations in memory, checksumming time, or disk space.

Even without file content tracking, being able to manage files with git, move files around and delete files with versioned directory trees, and use branches and distributed clones, are all very handy reasons to use git. And annexed files can co-exist in the same git repository with regularly versioned files, which is convenient for maintaining documents, Makefiles, etc that are associated with annexed files but that benefit from full revision control.

When a file is annexed, its content is moved into a key-value store, and a symlink is made that points to the content. These symlinks are checked into git and versioned like regular files. You can move them around, delete them, and so on. Pushing to another git repository will make git-annex there aware of the annexed file, and it can be used to retrieve its content from the key-value store.

EXAMPLES
 # git annex get video/hackity_hack_and_kaxxt.mov
 get video/hackity_hack_and_kaxxt.mov (not available)
   I was unable to access these remotes: server
   Try making some of these repositories available:
       5863d8c0-d9a9-11df-adb2-af51e6559a49 -- my home file server
        58d84e8a-d9ae-11df-a1aa-ab9aa8c00826 -- portable USB drive
        ca20064c-dbb5-11df-b2fe-002170d25c55 -- backup SATA drive
 failed
 # sudo mount /media/usb
 # git remote add usbdrive /media/usb
 # git annex get video/hackity_hack_and_kaxxt.mov
 get video/hackity_hack_and_kaxxt.mov (from usbdrive...) ok

 # git annex add iso
 add iso/Debian_5.0.iso ok

 # git annex drop iso/Debian_4.0.iso
 drop iso/Debian_4.0.iso ok

 # git annex move iso --to=usbdrive
 move iso/Debian_5.0.iso (moving to usbdrive...) ok

COMMONLY USED COMMANDS

help

    Display built-in help.

    For help on a specific command, use git annex help command

add [path ...]
    Adds files to the annex.

    See git-annex-add(1) for details.

get [path ...]
    Makes the content of annexed files available in this repository.

    See git-annex-get(1) for details.

drop [path ...]
    Drops the content of annexed files from this repository.

    See git-annex-drop(1) for details.

move [path ...] [--from=remote|--to=remote]
    Moves the content of files from or to another remote.

    See git-annex-move(1) for details.

copy [path ...] [--from=remote|--to=remote]
    Copies the content of files from or to another remote.

    See git-annex-copy(1) for details.

status [path ...]
    Show the working tree status. (deprecated)

    See git-annex-status(1) for details.

unlock [path ...]
    Unlock annexed files for modification.

    See git-annex-unlock(1) for details.

edit [path ...]
    This is an alias for the unlock command. May be easier to remember, if you think of this as allowing you to edit an annexed file.

lock [path ...]
    Use this to undo an unlock command if you don't want to modify the files, or have made modifications you want to discard.

    See git-annex-lock(1) for details.

pull [remote ...]
    Pull content from remotes.

    See git-annex-pull(1) for details.

push [remote ...]
    Push content to remotes.

    See git-annex-push(1) for details.

sync [remote ...]
    Synchronize local repository with remotes.

    See git-annex-sync(1) for details.

assist [remote ...]
    Add files and sync changes with remotes.

    See git-annex-assist(1) for details.

satisfy [remote ...]
    Satisfy preferred content settings by transferring and dropping content.

    See git-annex-satisfy(1) for details.

mirror [path ...] [--to=remote|--from=remote]
    Mirror content of files to/from another repository.

    See git-annex-mirror(1) for details.

addurl [url ...]
    Downloads each url to its own file, which is added to the annex.

    See git-annex-addurl(1) for details.

rmurl file url
    Record that the file is no longer available at the url.

    See git-annex-rmurl(1) for details.

import --from remote branch[:subdir] | [path ...]
    Add a tree of files to the repository.

    See git-annex-import(1) for details.

importfeed [url ...]
    Imports the contents of podcast feeds into the annex.

    See git-annex-importfeed(1) for details.

export treeish --to remote
    Export content to a remote.

    See git-annex-export(1) for details.

undo [filename|directory] ...
    Undo last change to a file or directory.

    See git-annex-undo(1) for details.

addcomputed
    Adds computed files to the repository.

    See git-annex-addcomputed(1) for details.

recompute
    Recomputes computed files.

    See git-annex-recompute(1) for details.

findcomputed
    Lists computed files.

    See git-annex-findcomputed(1) for details.

multicast
    Multicast file distribution.

    See git-annex-multicast(1) for details.

watch
    Daemon to watch for changes and autocommit.

    See git-annex-watch(1) for details.

assistant
    Daemon to automatically sync changes.

    See git-annex-assistant(1) for details.

webapp
    Opens a web app, that allows easy setup of a git-annex repository, and control of the git-annex assistant. If the assistant is not already running, it will be started.

    See git-annex-webapp(1) for details.

p2phttp
    Allows a git-annex repository to be accessed over HTTP using git-annex p2p protocol.

    See git-annex-p2phttp(1) for details.

remotedaemon
    Persistant communication with remotes.

    See git-annex-remotedaemon(1) for details.

REPOSITORY SETUP COMMANDS

init [description]

    Until a repository (or one of its remotes) has been initialized, git-annex will refuse to operate on it, to avoid accidentally using it in a repository that was not intended to have an annex.

    See git-annex-init(1) for details.

describe repository description
    Changes the description of a repository.

    See git-annex-describe(1) for details.

initremote name type=value [param=value ...]
    Creates a new special remote, and adds it to .git/config.

    See git-annex-initremote(1) for details.

enableremote name [param=value ...]
    Enables use of an existing special remote in the current repository.

    See git-annex-enableremote(1) for details.

configremote name [param=value ...]
    Changes configuration of an existing special remote.

    See git-annex-configremote(1) for details.

renameremote
    Renames a special remote.

    See git-annex-renameremote(1) for details.

enable-tor
    Sets up tor hidden service.

    See git-annex-enable-tor(1) for details.

numcopies [N]
    Configure desired number of copies.

    See git-annex-numcopies(1) for details.

mincopies [N]
    Configure minimum number of copies.

    See git-annex-mincopies(1) for details.

trust [repository ...]
    Records that a repository is trusted to not unexpectedly lose content. Use with care.

    See git-annex-trust(1) for details.

untrust [repository ...]
    Records that a repository is not trusted and could lose content at any time.

    See git-annex-untrust(1) for details.

semitrust [repository ...]
    Returns a repository to the default semi trusted state.

    See git-annex-semitrust(1) for details.

group repository groupname
    Add a repository to a group.

    See git-annex-group(1) for details.

ungroup repository groupname
    Removes a repository from a group.

    See git-annex-ungroup(1) for details.

wanted repository [expression]
    Get or set preferred content expression.

    See git-annex-wanted(1) for details.

groupwanted groupname [expression]
    Get or set groupwanted expression.

    See git-annex-groupwanted(1) for details.

required repository [expression]
    Get or set required content expression.

    See git-annex-required(1) for details.

maxsize repository [size]
    Get or set maximum size of repository.

initcluster
    Initializes a new cluster.

    See git-annex-initcluster(1) for details.

updatecluster
    Update records of cluster nodes.

    See git-annex-updatecluster(1) for details.

extendcluster
    Adds an additional gateway to a cluster.

    See git-annex-extendcluster(1) for details.

updateproxy
    Update records with proxy configuration.

    See git-annex-updateproxy(1) for details.

schedule repository [expression]
    Get or set scheduled jobs.

    See git-annex-schedule(1) for details.

config
    Get and set other configuration stored in git-annex branch.

    See git-annex-config(1) for details.

vicfg
    Opens EDITOR on a temp file containing most of the above configuration settings, as well as a few others, and when it exits, stores any changes made back to the git-annex branch.

    See git-annex-vicfg(1) for details.

adjust
    Switches a repository to use an adjusted branch, which can automatically unlock all files, etc.

    See git-annex-adjust(1) for details.

direct
    Switches a repository to use direct mode. (deprecated)

    See git-annex-direct(1) for details.

indirect
    Switches a repository to use indirect mode. (deprecated)

    See git-annex-indirect(1) for details.

REPOSITORY MAINTENANCE COMMANDS

fsck [path ...]

    Checks the annex consistency, and warns about or fixes any problems found. This is a good complement to git fsck.

    See git-annex-fsck(1) for details.

expire [repository:]time ...
    Expires repositories that have not recently performed an activity (such as a fsck).

    See git-annex-expire(1) for details.

unused
    Checks the annex for data that does not correspond to any files present in any tag or branch, and prints a numbered list of the data.

    See git-annex-unused(1) for details.

dropunused [number|range ...]
    Drops the data corresponding to the numbers, as listed by the last git annex unused

    See git-annex-dropunused(1) for details.

addunused [number|range ...]
    Adds back files for the content corresponding to the numbers or ranges, as listed by the last git annex unused.

    See git-annex-addunused(1) for details.

fix [path ...]
    Fixes up symlinks that have become broken to again point to annexed content.

    See git-annex-fix(1) for details.

merge
    Automatically merge changes from remotes.

    See git-annex-merge(1) for details.

upgrade
    Upgrades the repository.

    See git-annex-upgrade(1) for details.

dead [repository ...] [--key key]
    Indicates that a repository or a single key has been irretrievably lost.

    See git-annex-dead(1) for details.

forget
    Causes the git-annex branch to be rewritten, throwing away historical data about past locations of files.

    See git-annex-forget(1) for details.

filter-branch
    Produces a filtered version of the git-annex branch.

    See git-annex-filter-branch(1) for details.

repair
    This can repair many of the problems with git repositories that git fsck detects, but does not itself fix. It's useful if a repository has become badly damaged. One way this can happen is if a repository used by git-annex is on a removable drive that gets unplugged at the wrong time.

    See git-annex-repair(1) for details.

p2p Configure peer-2-Peer links between repositories.

    See git-annex-p2p(1) for details.

QUERY COMMANDS

find [path ...]

    Outputs a list of annexed files in the specified path. With no path, finds files in the current directory and its subdirectories.

    See git-annex-find(1) for details.

whereis [path ...]
    Displays information about where the contents of files are located.

    See git-annex-whereis(1) for details.

list [path ...]
    Displays a table of remotes that contain the contents of the specified files. This is similar to whereis but a more compact display.

    See git-annex-list(1) for details.

whereused
    Finds what files use or used a key.

log [path ...]
    Displays the location log for the specified file or files, showing each repository they were added to ("+") and removed from ("-").

    See git-annex-log(1) for details.

oldkeys [path ...]
    List keys used for old versions of files.

    See git-annex-oldkeys(1) for details.

info [directory|file|remote|uuid ...]
    Displays statistics and other information for the specified item, which can be a directory, or a file, or a remote, or the uuid of a repository.

    When no item is specified, displays statistics and information for the repository as a whole.

    See git-annex-info(1) for details.

version
    Shows the version of git-annex, as well as repository version information.

    See git-annex-version(1) for details.

map Generate map of repositories.

    See git-annex-map(1) for details.

inprogress
    Access files while they're being downloaded.

    See git-annex-inprogress(1) for details.

findkeys
    Similar to git-annex find, but operating on keys.

    See git-annex-findkeys(1) for details.

METADATA COMMANDS

metadata [path ...]

    The content of an annexed file can have any number of metadata fields attached to it to describe it. Each metadata field can in turn have any number of values.

    This command can be used to set metadata, or show the currently set metadata.

    See git-annex-metadata(1) for details.

view [tag ...] [field=value ...] [field=glob ...] [?tag ...] [field?=glob] [!tag ...] [field!=value ...]
    Uses metadata to build a view branch of the files in the current branch, and checks out the view branch. Only files in the current branch whose metadata matches all the specified field values and tags will be shown in the view.

    See git-annex-view(1) for details.

vpop [N]
    Switches from the currently active view back to the previous view. Or, from the first view back to original branch.

    See git-annex-vpop(1) for details.

vfilter [tag ...] [field=value ...] [!tag ...] [field!=value ...]
    Filters the current view to only the files that have the specified field values and tags.

    See git-annex-vfilter(1) for details.

vadd [field=glob ...] [field=value ...] [tag ...]
    Changes the current view, adding an additional level of directories to categorize the files.

    See git-annex-vfilter(1) for details.

vcycle
    When a view involves nested subdirectories, this cycles the order.

    See git-annex-vcycle(1) for details.

UTILITY COMMANDS

migrate [path ...]

    Changes the specified annexed files to use a different key-value backend.

    See git-annex-migrate(1) for details.

reinject src dest
    Moves the src file into the annex as the content of the dest file. This can be useful if you have obtained the content of a file from elsewhere and want to put it in the local annex.

    See git-annex-reinject(1) for details.

unannex [path ...]
    Use this to undo an accidental git annex add command. It puts the file back how it was before the add.

    See git-annex-unannex(1) for details.

uninit
    De-initialize git-annex and clean out repository.

    See git-annex-uninit(1) for details.

reinit uuid|description
    Initialize repository, reusing old UUID.

    See git-annex-reinit(1) for details.

PLUMBING COMMANDS

pre-commit [path ...]

    This is meant to be called from git's pre-commit hook. git annex init automatically creates a pre-commit hook using this.

    See git-annex-pre-commit(1) for details.

post-receive
    This is meant to be called from git's post-receive hook. git annex init automatically creates a post-receive hook using this.

    See git-annex-post-receive(1) for details.

lookupkey [file ...]
    Looks up key used for file.

    See git-annex-lookupkey(1) for details.

calckey [file ...]
    Calculates the key that would be used to refer to a file.

    See git-annex-calckey(1) for details.

contentlocation [key ..]
    Looks up location of annexed content for a key.

    See git-annex-contentlocation(1) for details.

examinekey [key ...]
    Print information that can be determined purely by looking at the key.

    See git-annex-examinekey(1) for details.

matchexpression
    Checks if a preferred content expression matches provided data.

    See git-annex-matchexpression(1) for details.

fromkey [key file]
    Manually set up a file in the git repository to link to a specified key.

    See git-annex-fromkey(1) for details.

registerurl [key url]
    Registers an url for a key.

    See git-annex-registerurl(1) for details.

unregisterurl [key url]
    Unregisters an url for a key.

    See git-annex-unregisterurl(1) for details.

reregisterurl [key url]
    Updates url registration information.

    See git-annex-reregisterurl(1) for details.

setkey key file
    Moves a file into the annex as the content of a key.

    See git-annex-setkey(1) for details.

dropkey [key ...]
    Drops annexed content for specified keys.

    See git-annex-dropkey(1) for details.

transferkey key [--from=remote|--to=remote]
    Transfers a key from or to a remote.

    See git-annex-transferkey(1) for details.

transferrer
    Used internally by git-annex to transfer content.

    See git-annex-transferrer(1) for details.

transferkeys
    Used internally by old versions of the assistant.

    See git-annex-transferkey(1) for details.

setpresentkey key uuid [1|0]
    This plumbing-level command changes git-annex's records about whether the specified key's content is present in a remote with the specified uuid.

    See git-annex-setpresentkey(1) for details.

readpresentkey key uuid
    Read records of where key is present.

    See git-annex-readpresentkey(1) for details.

checkpresentkey key remote
    Check if key is present in remote.

    See git-annex-checkpresentkey(1) for details.

rekey [file key ...]
    Change keys used for files.

    See git-annex-rekey(1) for details.

resolvemerge
    Resolves a conflicted merge, by adding both conflicting versions of the file to the tree, using variants of their filename. This is done automatically when using git annex sync or git-annex pull or git annex merge.

    See git-annex-resolvemerge(1) for details.

diffdriver
    This can be used to make git diff diff the content of annexed files.

    See git-annex-diffdriver(1) for details.

smudge
    This command lets git-annex be used as a git filter driver, allowing annexed files in the git repository to be unlocked regular files instead of symlinks.

    See git-annex-smudge(1) for details.

filter-process
    An alternative implementation of a git filter driver, that is faster in some situations and slower in others than git-annex smudge.

    See git-annex-filter-process(1) for details.

restage
    Restages unlocked files in the git index.

    See git-annex-restage(1) for details.

findref [ref]
    Lists files in a git ref. (deprecated)

    See git-annex-findref(1) for details.

proxy -- git cmd [options]
    Bypass direct mode guard. (deprecated)

    See git-annex-proxy(1) for details.

TESTING COMMANDS

test

    This runs git-annex's built-in test suite.

    See git-annex-test(1) for details.

testremote remote
    This tests a remote by generating some random objects and sending them to the remote, then redownloading them, removing them from the remote, etc.

    It's safe to run in an existing repository (the repository contents are not altered), although it may perform expensive data transfers.

    See git-annex-testremote(1) for details.

sim This simulates a network of git-annex repositories. It can be used to test a configuration before using it in the real world.

    See git-annex-sim(1) for details.

fuzztest
    Generates random changes to files in the current repository, for use in testing the assistant.

    See git-annex-fuzztest(1) for details.

benchmark
    This runs git-annex's built-in benchmarks, if it was built with benchmarking support.

    See git-annex-benchmark(1) for details.

ADDON COMMANDS
In addition to all the commands listed above, more commands can be added to git-annex by dropping commands named like "git-annex-foo" into a directory in the PATH.

CONFIGURATION
Like other git commands, git-annex is configured via .git/config. These settings, as well as relevant git config settings, are the ones git-annex uses.

(Some of these settings can also be set, across all clones of the repository, using git-annex-config. See its man page for a list.)

annex.uuid
    A unique UUID for this repository (automatically set).

annex.backend
    Name of the default key-value backend to use when adding new files to the repository. See git-annex-backends(1) for information about available backends.

    This is overridden by annex annex.backend configuration in the .gitattributes files, and by the --backend option.

    (This used to be named annex.backends, and that will still be used if set.)

annex.securehashesonly
    Set to true to indicate that the repository should only use cryptographically secure hashes (SHA2, SHA3) and not insecure hashes (MD5, SHA1) for content.

    When this is set, the contents of files using cryptographically insecure hashes will not be allowed to be added to the repository.

    Also, git-annex fsck will complain about any files present in the repository that use insecure hashes. And, git-annex import --no-content will refuse to import files from special remotes using insecure hashes.

    To configure the behavior in new clones of the repository, this can be set using git-annex-config.

annex.maxextensionlength
    Maximum length, in bytes, of what is considered a filename extension. This is used when adding a file to a backend that preserves filename extensions, and also when generating a view branch.

    The default length is 4, which allows extensions like "jpeg". The dot before the extension is not counted part of its length.

annex.maxextensions
    Maximum number of filename extensions to preserve when using a backend that preserves filename extensions, and also when generating a view branch.

    The default is 2, which allows for compound extensions like ".tar.gz". When set to 1, it will only preserve the last extension, eg ".gz".

annex.diskreserve
    Amount of disk space to reserve. Disk space is checked when transferring annexed content to avoid running out, and additional free space can be reserved via this option, to make space for other data (such as git commit logs). Can be specified with any commonly used units, for example, "0.5 gb", "500M", or "100 KiloBytes"

    The default reserve is 100 megabytes.

annex.fullybalancedthreshhold
    Configures the percent full a repository must be in order for the "fullybalanced" preferred content expression to consider it to be full. The default is 90.

annex.skipunknown
    Set to true to make commands like "git-annex get" silently skip over items that are listed in the command line, but are not checked into git.

    Set to false to make it an error for commands like "git-annex get" to be asked to operate on files that are not checked into git. (This is the default in recent versions of git-annex.)

    Note that, when annex.skipunknown is false, a command like "git-annex get ." will fail if no files in the current directory are checked into git. Commands like "git-annex get foo/" will fail if no files in the directory are checked into git, but if at least one file is, it will ignore other files that are not. This is all the same as the behavior of "git-ls files --error-unmatch".

    Also note that git-annex skips files that are checked into git, but are not annexed files; this setting does not affect that.

annex.largefiles
    Used to configure which files are large enough to be added to the annex. It is an expression that matches the large files, eg "include=*.mp3 or largerthan=500kb" See git-annex-matching-expression(1) for details on the syntax.

    Overrides any annex.largefiles attributes in .gitattributes files.

    To configure a default annex.largefiles for all clones of the repository, this can be set in git-annex-config(1).

    This configures the behavior of both git-annex and git when adding files to the repository. By default, git-annex add adds all files to the annex (except dotfiles and files in dotdirs), and git add adds files to git (unless they were added to the annex previously). When annex.largefiles is configured, both git annex add and git add will add matching large files to the annex, and the other files to git.

    Other git-annex commands also honor annex.largefiles, including git annex import, git annex addurl, git annex importfeed, git-annex assist, and the git-annex assistant.

annex.dotfiles
    Normally, dotfiles and files inside dotdirs are assumed to be configuration files like .gitignore, whose content should always be part of the git repository, so they will not be added to the annex. Setting annex.dotfiles to true makes these files be added to the annex the same as any other file.

    To annex only some dotfiles, set this and configure annex.largefiles to match the ones you want. For example, to match only dotfiles ending in ".big"

     git config annex.largefiles "(include=.*.big or include=*/.*.big) or (exclude=.* and exclude=*/.*)"
     git config annex.dotfiles true

    To configure a default annex.dotfiles for all clones of the repository, this can be set in git-annex-config(1).

annex.gitaddtoannex
    Setting this to false will prevent git add from adding files to the annex, despite the annex.largefiles configuration.

annex.addsmallfiles
    Controls whether small files (files not matching annex.largefiles, or dotfiles) should be checked into git by git annex add. Defaults to true; set to false to instead make small files be skipped.

annex.addunlocked
    Commands like git-annex add default to adding files to the repository in locked form. This can make them add the files in unlocked form, the same as if git-annex-unlock(1) were run on the files.

    This can be set to "true" to add everything unlocked, or it can be a more complicated expression that matches files by name, size, or content. See git-annex-matching-expression(1) for details.

    To configure a default annex.addunlocked for all clones of the repository, this can be set in git-annex-config(1).

    Using git add always adds files in unlocked form and it is not affected by this setting. The assistant defaults to adding all files unlocked, unless annex.assistant.allowunlocked is set.

    When a repository has core.symlinks set to false, or has an adjusted unlocked branch checked out, this setting is ignored, and files are always added to the repository in unlocked form.

annex.assistant.allowunlocked
    The git-annex assistant defaults to adding all files unlocked, so that files can be modified without the user needing to do anything to unlock them.

    If this is set to true then it will instead use the annex.addunlocked configuration to decide which files to add unlocked.

annex.numcopies
    This is a deprecated setting. You should instead use the git annex numcopies command to configure how many copies of files are kept across all repositories, or the annex.numcopies .gitattributes setting.

    This config setting is only looked at when git annex numcopies has never been configured, and when there's no annex.numcopies setting in the .gitattributes file.

annex.genmetadata
    Set this to true to make git-annex automatically generate some metadata when adding files to the repository.

    In particular, it stores year, month, and day metadata, from the file's modification date.

    When importfeed is used, it stores additional metadata from the feed, such as the author, title, etc.

annex.used-refspec
    This controls which refs git-annex unused considers to be used. See REFSPEC FORMAT in git-annex-unused(1) for details.

annex.jobs
    Configure the number of concurrent jobs to run. Default is 1.

    Only git-annex commands that support the --jobs option will use this.

    Setting this to "cpus" will run one job per CPU core.

    When the --batch option is used, this configuration is ignored.

annex.adjustedbranchrefresh
    When git-annex-adjust(1) is used to set up an adjusted branch that needs to be refreshed after getting or dropping files, this config controls how frequently the branch is refreshed.

    Refreshing the branch takes some time, so doing it after every file can be too slow. (It also can generate a lot of dangling git objects.) The default value is 0 (or false), which does not refresh the branch. Setting 1 (or true) will refresh only once, after git-annex has made other changes. Setting 2 refreshes after every file, 3 after every other file, and so on; setting 100 refreshes after every 99 files.

    (If git-annex gets faster in the future, refresh rates will increase proportional to the speed improvements.)

annex.queuesize
    git-annex builds a queue of git commands, in order to combine similar commands for speed. By default the size of the queue is limited to 10240 commands; this can be used to change the size. If you have plenty of memory and are working with very large numbers of files, increasing the queue size can speed it up.

annex.bloomcapacity
    The git annex unused and git annex sync --content commands use a bloom filter to determine what files are present in eg, the work tree. The default bloom filter is sized to handle up to 500000 files. If your repository is larger than that, you should increase this value. Larger values will make git-annex unused and git annex sync --content consume more memory; run git annex info for memory usage numbers.

annex.bloomaccuracy
    Adjusts the accuracy of the bloom filter used by git annex unused and git annex sync --content. The default accuracy is 10000000 -- 1 unused file out of 10000000 will be missed by git annex unused. Increasing the accuracy will make git annex unused consume more memory; run git annex info for memory usage numbers.

annex.sshcaching
    By default, git-annex caches ssh connections using ssh's ControlMaster and ControlPersist settings (if built using a new enough ssh). To disable this, set to false.

annex.adviceNoSshCaching
    When git-annex is unable to use ssh connection caching, or has been configured not to, and concurrency is enabled, it will warn that this might result in multiple ssh processes prompting for passwords at the same time. To disable that warning, eg if you have configured ssh connection caching yourself, or have ssh agent caching passwords, set this to false.

annex.alwayscommit
    By default, git-annex automatically commits data to the git-annex branch after each command is run. If you have a series of commands that you want to make a single commit, you can run the commands with -c annex.alwayscommit=false. You can later commit the data by running git annex merge (or by automatic merges) or git annex sync.

annex.commitmessage
    When git-annex updates the git-annex branch, it usually makes up its own commit message (eg "update"), since users rarely look at or care about changes to that branch. If you do care, you can specify this setting by running commands with -c annex.commitmessage=whatever

    This works well in combination with annex.alwayscommit=false, to gather up a set of changes and commit them with a message you specify.

annex.commitmessage-command
    This command is run and its output is used as the commit message to the git-annex branch.

    Alternatively, a hook script can be installed in .git/hooks/commitmessage-annex

annex.post-update-command
    This command is run after git-annex updates the git-annex branch.

    When publishing a git-annex repository by http, this can be used to run git update-server-info

    Alternatively, a hook script can be installed in .git/hooks/post-update-annex

annex.pre-commit-command
    This command is run whenever a commit is made to the HEAD branch of the git repository, either by git commit, or by git-annex.

    Alternatively, a hook script can be installed in .git/hooks/pre-commit-annex

annex.pre-init-command
    This command is run before the repository is initialized, either by git-annex init, or automatic initialization. It can configure the repository in any way needed. If it exits nonzero, the repository initialization will fail.

    Alternatively, a hook script can be installed in .git/hooks/pre-init-annex

annex.alwayscompact
    By default, git-annex compacts data it records in the git-annex branch. Setting this to false avoids doing that compaction in some cases, which can speed up operations that populate the git-annex branch with a lot of data. However, when used with operations that overwrite old values in the git-annex branch, that may cause the git-annex branch to use more disk space, and so slow down reading data from it.

    An example of a command that can be sped up by using -c annex.alwayscompact=false is git-annex registerurl --batch, when adding a large number of urls to the same key.

    This option was first supported by git-annex version 10.20220724. It is not entirely safe to set this option in a repository that may also be used by an older version of git-annex at the same time as a version that supports this option.

annex.allowsign
    By default git-annex avoids gpg signing commits that it makes when they're not the purpose of a command, but only a side effect. That default avoids lots of gpg password prompts when commit.gpgSign is set. A command like git annex sync or git annex merge will gpg sign its commit, but a command like git annex get, that updates the git-annex branch, will not. The assistant also avoids signing commits.

    Setting annex.allowsign to true lets all commits be signed, as controlled by commit.gpgSign and other git configuration.

annex.merge-annex-branches
    By default, git-annex branches that have been pulled from remotes are automatically merged into the local git-annex branch, so that git-annex has the most up-to-date possible knowledge.

    To avoid that merging, set this to "false".

    This can be useful particularly when you don't have write permission to the repository. While git-annex is mostly able to work in a read-only repository with unmerged git-annex branches, some things do not work, and when it does work it will be slower due to needing to look at each of the unmerged branches.

annex.private
    When this is set to true, no information about the repository will be recorded in the git-annex branch.

    For example, to make a repository without any mention of it ever appearing in the git-annex branch:

     git init myprivate
     cd myprivaterepo
     git config annex.private true
     git annex init

annex.hardlink
    Set this to true to make file contents be hard linked between the repository and its remotes when possible, instead of a more expensive copy.

    Use with caution -- This can invalidate numcopies counting, since with hard links, fewer copies of a file can exist. So, it is a good idea to mark a repository using this setting as untrusted.

    When a repository is set up using git clone --shared, git-annex init will automatically set annex.hardlink and mark the repository as untrusted.

    When annex.thin is also set, setting annex.hardlink has no effect.

annex.thin
    Set this to true to make unlocked files be a hard link to their content in the annex, rather than a second copy. This can save considerable disk space, but when a modification is made to a file, you will lose the local (and possibly only) copy of the old version. Any other, locked files in the repository that pointed to that content will get broken as well (git-annex fsck will detect and clean up after that). So, enable this with care.

    After setting (or unsetting) this, you should run git annex fix to fix up the annexed files in the work tree to be hard links (or copies).

    Note that this has no effect when the filesystem does not support hard links. And when multiple files in the work tree have the same content, only one of them gets hard linked to the annex.

annex.supportunlocked
    By default git-annex supports unlocked files as well as locked files, so this defaults to true. If set to false, git-annex will only support locked files. That will avoid doing the work needed to support unlocked files.

    Note that setting this to false does not prevent a repository from having unlocked files added to it, and in that case the content of the files will not be accessible until they are locked.

    After changing this config, you need to re-run git-annex init for it to take effect.

annex.trashbin
    When this is set to the name of a remote, files that are dropped from the repository will be moved to that remote.

    Note that, if it takes a long time to move a file to the remote, the user will not see a progress display for their drop action. So this is best used with a fast remote.

    And, if the remote is not accessible, or a file fails to be moved to it, the file will not be dropped from the repository.

annex.url
    When a remote has a http url, the first time git-annex uses the remote it will check if it can download its .git/config file. If it is able to, and the file has this config set to an "annex+http" or "annex+https" url, that url will be copied into remote.<name>.annexUrl.

annex.resolvemerge
    Set to false to prevent merge conflicts in the checked out branch being automatically resolved by the git-annex assitant, git-annex assist, git-annex sync, git-annex pull, git-annex merge, and the git-annex post-receive hook.

    To configure the behavior in all clones of the repository, this can be set in git-annex-config(1).

annex.synccontent
    Set to true to make git-annex sync default to transferring annexed content.

    Set to false to prevent git-annex assist, git-annex pull and git-annex push from transferring annexed content.

    To configure the behavior in all clones of the repository, this can be set in git-annex-config(1).

annex.synconlyannex
    Set to true to make git-annex assist, git-annex sync, git-annex pull, and git-annex push default to only operating on the git-annex branch and annexed content.

    To configure the behavior in all clones of the repository, this can be set in git-annex-config(1).

annex.syncmigrations
    Set to false to prevent git-annex sync and git-annex pull from scanning for migrations and updating the local repository for those migrations.

annex.viewunsetdirectory
    This configures the name of a directory that is used in a view to contain files that do not have metadata set. The default name for the directory is "_". See git-annex-view(1) for details.

annex.debug
    Set to true to enable debug logging by default.

annex.debugfilter
    Set to configure which debug messages to display (when debug message display has been enabled by annex.debug or --debug). The value is one or more module names, separated by commas.

annex.version
    The current version of the git-annex repository. This is maintained by git-annex and should never be manually changed.

annex.autoupgraderepository
    When an old git-annex repository version is no longer supported, git-annex will normally automatically upgrade the repository to the new version. It may also sometimes upgrade from an old repository version that is still supported but that is not as good as a later version.

    If this is set to false, git-annex won't automatically upgrade the repository. If the repository version is not supported, git-annex will instead exit with an error message. If it is still supported, git-annex will continue to work.

    You can run git annex upgrade yourself when you are ready to upgrade the repository.

annex.crippledfilesystem
    Set to true if the repository is on a crippled filesystem, such as FAT, which does not support symbolic links, or hard links, or unix permissions. This is automatically probed by "git annex init".

annex.pidlock
    Normally, git-annex uses fine-grained lock files to allow multiple processes to run concurrently without getting in each others' way. That works great, unless you are using git-annex on a filesystem that does not support POSIX fcntl locks. This is sometimes the case when using NFS or Lustre filesystems.

    To support such situations, you can set annex.pidlock to true, and it will fall back to a single top-level pid file lock.

    Although, often, you'd really be better off fixing your networked filesystem configuration to support POSIX locks.. And, some networked filesystems are so inconsistent that one node can't reliably tell when the other node is holding a pid lock. Caveat emptor.

annex.pidlocktimeout
    git-annex will wait up to this many seconds for the pid lock file to go away, and will then abort if it cannot continue. Default: 300

    When using pid lock files, it's possible for a stale lock file to get left behind by previous run of git-annex that crashed or was interrupted. This is mostly avoided, but can occur especially when using a network file system. This timeout prevents git-annex waiting forever in such a situation.

annex.dbdir
    The directory where git-annex should store its sqlite databases. The default location is inside .git/annex/.

    Certian filesystems, such as cifs, may not support locking operations that sqlite needs, and setting this to a directory on another filesystem can work around such a problem.

    This can safely be set to the same directory in the configuration of multiple repositories; each repository will use a subdirectory for its sqlite database.

annex.cachecreds
    When "true" (the default), git-annex will cache credentials used to access special remotes in files in .git/annex/creds/ that only you can read. To disable that caching, set to "false", and credentials will only be read from the environment, or if they have been embedded in encrypted form in the git repository, will be extracted and decrypted each time git-annex needs to access the remote.

annex.secure-erase-command
    This can be set to a command that should be run whenever git-annex removes the content of a file from the repository.

    In the command line, %file is replaced with the file that should be erased.

    For example, to use the wipe command, set it to wipe -f %file.

    Alternatively to setting the git config, a hook script can be installed in .git/hooks/secure-erase-annex. The hook is passed the file to be erased as its only parameter.

annex.freezecontent-command, annex.thawcontent-command
    Usually the write permission bits are unset to protect annexed objects from being modified or deleted. Freezecontent is run after git-annex has removed (or attempted to remove) the write bit, and can be used to prevent writing in some other way. Thawcontent should undo its effect, and is run before git-annex restores the write bit.

    In the command line, %path is replaced with the file or directory to operate on.

    (When annex.crippledfilesystem is set, git-annex will not try to remove/restore the write bit, but it will still run freezecontent and thawcontent.)

    Alternatively to setting the git config, hook scripts can be installed in .git/hooks/freezecontent-annex and .git/hooks/thawcontent-annex. The hook is passed the file or directory to operate on as its only parameter.

annex.tune.objecthash1, annex.tune.objecthashlower, annex.tune.branchhash1
    These can be passed to git annex init to tune the repository. They cannot be safely changed in a running repository and should never be set in global git configuration. For details, see <https://git-annex.branchable.com/tuning/>.

annex.cluster.<name>
    This is set to make the repository be a gateway to a cluster. The value is the cluster UUID. Note that cluster UUIDs are not the same as repository UUIDs, and a repository UUID cannot be used here.

    Usually this is set up by running git-annex-initcluster or git-annex-extendcluster.

CONFIGURATION OF REMOTES
Remotes are configured using these settings in .git/config.

remote.<name>.annex-cost
    When determining which repository to transfer annexed files from or to, ones with lower costs are preferred. The default cost is 100 for local repositories, and 200 for remote repositories.

remote.<name>.annex-cost-command
    If set, the command is run, and the number it outputs is used as the cost. This allows varying the cost based on e.g., the current network.

remote.<name>.annex-start-command
    A command to run when git-annex begins to use the remote. This can be used to, for example, mount the directory containing the remote.

    The command may be run repeatedly when multiple git-annex processes are running concurrently.

remote.<name>.annex-stop-command
    A command to run when git-annex is done using the remote.

    The command will only be run once *all* running git-annex processes are finished using the remote.

remote.<name>.annex-shell
    Specify an alternative git-annex-shell executable on the remote instead of looking for "git-annex-shell" on the PATH.

    This is useful if the git-annex-shell program is outside the PATH or has a non-standard name.

remote.<name>.annex-ignore
    If set to true, prevents git-annex from storing or retrieving annexed file contents on this remote by default. (You can still request it be used with the --from and --to options.)

    This is, for example, useful if the remote is located somewhere without git-annex-shell. (For example, if it's on GitHub). Or, it could be used if the network connection between two repositories is too slow to be used normally.

    This does not prevent git-annex sync, git-annex pull, git-annex push, git-annex assist or the git-annex assistant from operating on the git repository. It only affects annexed content.

remote.<name>.annex-ignore-command
    If set, the command is run, and if it exits nonzero, that's the same as setting annex-ignore to true. This allows controlling behavior based on e.g., the current network.

remote.<name>.annex-sync
    If set to false, prevents git-annex sync (and git-annex pull, git-annex push, git-annex assist, and the git-annex assistant) from operating on this remote by default.

remote.<name>.annex-sync-command
    If set, the command is run, and if it exits nonzero, that's the same as setting annex-sync to false. This allows controlling behavior based on e.g., the current network.

remote.<name>.annex-pull
    If set to false, prevents git-annex pull, git-annex sync, git-annex assist and the git-annex assistant from ever pulling (or fetching) from the remote.

remote.<name>.annex-push
    If set to false, prevents git-annex push, git-annex sync, git-annex assist and the git-annex assistant from ever pushing to the remote.

remote.<name>.annex-readonly
    If set to true, prevents git-annex from making changes to a remote. This prevents git-annex sync and git-annex assist from pushing changes to a git repository. And it prevents storing or removing files from read-only remote.

remote.<name>.annex-verify, annex.verify
    By default, git-annex will verify the checksums of objects downloaded from remotes. If you trust a remote and don't want the overhead of these checksums, you can set this to false.

    Note that even when this is set to false, git-annex does verification in some edge cases, where it's likely the case than an object was downloaded incorrectly, or when needed for security.

remote.<name>.annex-fastcopy, annex.fastcopy
    Set to "true" to optimize copying files to/from a remote.

    Setting this allows cp to use the copy_file_range system call. (When the cp command supports it.) The benefit depends on the filesystem. For example, on NFS, this can allow a server-side copy to be done. On ext4, this avoids some memory transfer overhead, but the file still needs to be copied. There is no benefit on btrfs, since git-annex does the equivilantly fast CoW reflinking on btrfs by default.

    This will do little to improve copy speed when git-annex needs to read the copied file in order to verify it. So for maximum speed, as well as setting this option, set remote.<name>.annex-verify or annex.verify to false.

    Currently, setting this prevents resuming interrupted copies where they left off. An interrupted copy will be re-run from the beginning.

remote.<name>.annex-tracking-branch
    This is for use with special remotes that support exports and imports.

    When set to eg, "master", this tells git-annex that you want the special remote to track that branch.

    When set to eg, "master:subdir", the special remote tracks only the subdirectory of that branch.

    Setting this enables some other commands to work with these special remotes: git-annex pull will import changes from the remote and merge them into the annex-tracking-branch. And git-annex push will export changes to the remote. Higher-level commands git-annex sync --content and git-annex assist both import and export.

remote.<name>.annex-export-tracking
    Deprecated name for remote.<name>.annex-tracking-branch. Will still be used if it's configured and remote.<name>.annex-tracking-branch is not.

remote.<name>.annexUrl
    Can be used to specify a different url than the regular remote.<name>.url for git-annex to use for accessing the remote. Similar to the pushUrl used by git-push.

    When this is set to an annex+http or annex+https url, that url is used for git-annex operations only, and the remote.<name>.url is used for git operations. This allows using git-annex-p2phttp to serve a git-annex repository over http.

    When this and the remote.<name>.url contain the same hostname, and this is an annex+http(s) url, and that is also a http(s) url, git-annex assumes that the same username and password can be used for both urls. When password caching is configured, this allows you to only be prompted once for a password when using both git and git-annex. See gitcredentials(7) for how to set up password caching.

url.<base>.annexInsteadOf
    This works similarly to git's url.<base>.pushInsteadOf, rewriting a remote url that starts with the value of this config to instead start with <base>.

    The rewritten url is used by git-annex for accessing the remote, and works the same as remote.<name>.annexUrl, including supporting annex+http urls.

    Note that git-annex also supports git's url.<base>.insteadOf configuration. When both are set, the remote's url is first rewritten by insteadOf, and that rewritten url can then be further rewritten using annexInsteadOf.

remote.<name>.annex-uuid
    git-annex caches UUIDs of remote repositories here.

remote.<name>.annex-config-uuid
    Used for some special remotes, points to a different special remote configuration to use.

remote.<name>.annex-retry, annex.retry
    Number of times a transfer that fails can be retried. (default 0)

remote.<name>.annex-forward-retry, annex.forward-retry
    If a transfer made some forward progress before failing, this allows it to be retried even when annex.retry does not. The value is the maximum number of times to do that. (default 5)

    When both annex.retry and this are set, the maximum number of retries is the larger of the two.

remote.<name>.annex-retry-delay, annex.retry-delay
    Number of seconds to delay before the first retry of a transfer. When making multiple retries of the same transfer, the delay doubles after each retry. (default 1)

remote.<name>.annex-bwlimit, annex.bwlimit
    This can be used to limit how much bandwidth is used for a transfer from or to a remote.

    For example, to limit transfers to 1 mebibyte per second: git config annex.bwlimit "1MiB"

    This will work with many remotes, including git remotes, but not for remotes where the transfer is run by a separate program than git-annex.

remote.<name>.annex-bwlimit-download, annex.bwlimit-download
    Limit bandwith for downloads from a remote.

    Overrides remote.<name>.annex-bwlimit and annex.bwlimit

remote.<name>.annex-bwlimit-upload, annex.bwlimit-upload
    Limit bandwith for uploads to a remote.

    Overrides remote.<name>.annex-bwlimit and annex.bwlimit

remote.<name>.annex-stalldetection, annex.stalldetection
    Configuring this lets stalled or too-slow transfers be detected, and dealt with, so rather than getting stuck, git-annex will cancel the stalled operation. The transfer will be considered to have failed, so settings like annex.retry will control what it does next.

    The default is to automatically detect when transfers that have probably stalled, and suggest configuring this, but not cancel the stalled operations. For this to work, a remote needs to update its progress consistently. Remotes that do not will not have automatic stall detection done. And it may take a while for git-annex to decide a remote is really stalled when using automatic stall detection, since it needs to be conservative about what looks like a stall.

    Set to "false" to avoid all attempts at stall detection.

    To detect and cancel stalled transfers, set this to a value in the form "$amount/$timeperiod" which specifies how much data git-annex should expect to see flowing, minimum, over a given period of time.

    For example, to detect outright stalls where no data has been transferred after 30 seconds: git config annex.stalldetection "1KB/30s"

    Or, if you have a remote on a USB drive that is normally capable of several megabytes per second, but has bad sectors where it gets stuck for a long time, you could use: git config remote.usbdrive.annex-stalldetection "1MB/1m"

    Some remotes don't report transfer progress, and stalls cannot be detected when using those.

    Some remotes only report transfer progress occasionally, eg after each chunk. To avoid false timeouts in such a situation, if the first progress update takes longer to arrive than the configured time period, the stall detection will be automically adjusted to use a longer time period. For example, if the first progress update comes after 10 minutes, but annex.stalldetection is "1MB/1m", it will be treated as eg "30MB/30m".

    Configuring stall detection can make git-annex use more resources. To be able to cancel stalls, git-annex has to run transfers in separate processes (one per concurrent job). So it may need to open more connections to a remote than usual, or the communication with those processes may make it a bit slower.

remote.<name>.annex-stalldetection-download, annex.stalldetection-download
    Stall detection for downloads from a remote.

    For example, if a remote is often fast, but sometimes is very slow, and there is another remote that is consistently medium speed and that contains the same data, this could be set to treat the fast remote as stalled when it's slow. Then a command like git-annex get will fall back to downloading from the medium speed remote.

    Overrides remote.<name>.annex-stalldetection, annex.stalldetection

remote.<name>.annex-stalldetection-upload, annex.stalldetection-upload
    Stall detection for uploads to a remote.

    Overrides remote.<name>.annex-stalldetection, annex.stalldetection

remote.<name>.annex-checkuuid
    This only affects remotes that have their url pointing to a directory on the same system. git-annex normally checks the uuid of such remotes each time it's run, which lets it transparently deal with different drives being mounted to the location at different times.

    Setting annex-checkuuid to false will prevent it from checking the uuid at startup (although the uuid is still verified before making any changes to the remote repository). This may be useful to set to prevent unnecessary spin-up or automounting of a drive.

remote.<name>.annex-trustlevel
    Configures a local trust level for the remote. This overrides the value configured by the trust and untrust commands. The value can be any of "trusted", "semitrusted" or "untrusted".

remote.<name>.annex-speculate-present
    Set to "true" to make git-annex speculate that this remote may contain the content of any file, even though its normal location tracking does not indicate that it does. This will cause git-annex to try to get all file contents from the remote. Can be useful in setting up a caching remote.

remote.<name>.annex-proxy
    Set to "true" to make the local repository able to act as a proxy to this remote. The remote can be a git-annex repository or a special remote.

    After configuring this, run [[git-annex-updateproxy](1) to store the new configuration in the git-annex branch.

remote.<name>.annex-proxied-by
    Usually this is used internally, when git-annex sets up proxied remotes, and will not need to be configured. The value is the UUID of the git-annex repository that proxies access to this remote.

remote.<name>.annex-cluster-node
    Set to the name of a cluster to make this remote be part of the cluster. Names of multiple clusters can be separated by whitespace to make a remote be part of more than one cluster.

    After configuring this, run [[git-annex-updatecluster](1) to store the new configuration in the git-annex branch.

remote.<name>.annex-cluster-gateway
    Set to the UUID of a cluster that this remote serves as a gateway for. Multiple UUIDs can be listed, separated by whitespace. When the local repository is also a gateway for that cluster, it will proxy for the nodes of the remote gateway.

    Usually this is set up by running git-annex-extendcluster.

remote.<name>.annex-private
    When this is set to true, no information about the remote will be recorded in the git-annex branch. This is mostly useful for special remotes, and is set when using git-annex-initremote(1) with the --private option.

remote.<name>.annex-max-git-bundles, annex.max-git-bundles
    When using git-remote-annex to store a git repository in a special remote, this configures how many separate git bundle objects to store in the special remote before re-uploading a single git bundle that contains the entire git repository.

    The default is 100, which aims to avoid often needing to often re-upload, while preventing a clone or fetch needing to download too many objects. Set to 0 to disable re-uploading.

remote.<name>.annex-allow-encrypted-gitrepo
    Setting this to true allows using git-remote-annex to push the git repository to an encrypted special remote.

    That is not allowed by default, because it is impossible to git clone from an encrypted special remote, since it needs encryption keys stored in the remote. So take care that, if you set this, you don't rely on the encrypted special remote being the only copy of your git repository.

remote.<name>.annex-bare
    Can be used to tell git-annex if a remote is a bare repository or not. Normally, git-annex determines this automatically.

remote.<name>.annex-availability
    This configuration setting is no longer used.

remote.<name>.annex-ssh-options, annex.ssh-options
    Options to use when using ssh to talk to this remote.

remote.<name>.annex-rsync-options, annex.rsync-options
    Options to use when using rsync to or from this remote. For example, to force IPv6, and limit the bandwidth to 100Kbyte/s, set it to -6 --bwlimit 100

    Note that git-annex-shell has a whitelist of allowed rsync options, and others will not be be passed to the remote rsync. So using some options may break the communication between the local and remote rsyncs.

remote.<name>.annex-rsync-upload-options, annex.rsync-upload-options
    Options to use when using rsync to upload a file to a remote.

    These options are passed after other applicable rsync options, so can be used to override them. For example, to limit upload bandwidth to 10Kbyte/s, set --bwlimit 10.

remote.<name>.annex-rsync-download-options, annex.rsync-download-options
    Options to use when using rsync to download a file from a remote.

    These options are passed after other applicable rsync options, so can be used to override them.

remote.<name>.annex-rsync-transport
    The remote shell to use to connect to the rsync remote. Possible values are ssh (the default) and rsh, together with their arguments, for instance ssh -p 2222 -c blowfish; Note that the remote hostname should not appear there, see rsync(1) for details. When the transport used is ssh, connections are automatically cached unless annex.sshcaching is unset.

remote.<name>.annex-bup-split-options, annex.bup-split-options
    Options to pass to bup split when storing content in this remote. For example, to limit the bandwidth to 100Kbyte/s, set it to --bwlimit 100k (There is no corresponding option for bup join.)

remote.<name>.annex-gnupg-options, annex.gnupg-options
    Options to pass to GnuPG when it's encrypting data. For instance, to use the AES cipher with a 256 bits key and disable compression, set it to --cipher-algo AES256 --compress-algo none. (These options take precedence over the default GnuPG configuration, which is otherwise used.)

remote.<name>.annex-gnupg-decrypt-options, annex.gnupg-decrypt-options
    Options to pass to GnuPG when it's decrypting data. (These options take precedence over the default GnuPG configuration, which is otherwise used.)

remote.<name>.annex-shared-sop-command, annex.shared-sop-command
    Use this command, which is an implementation of the Stateless OpenPGP command line interface, rather than GnuPG for encrypting and decrypting data. This is only used when a special remote is configured with encryption=shared.

    For example, to use Sequoia PGP's sqop command, set this to "sqop".

remote.<name>.annex-shared-sop-profile, annex.shared-sop-profile
    When encrypting with a Stateless OpenPGP command, this can be used to specify the profile to use, such as "rfc4880".

    For a list of available profiles, run eg "sqop list-profiles encrypt"

    sqop list-profiles encrypt

remote.<name>.annex-rsyncurl
    Used by rsync special remotes, this configures the location of the rsync repository to use. Normally this is automatically set up by git annex initremote, but you can change it if needed.

remote.<name>.annex-buprepo
    Used by bup special remotes, this configures the location of the bup repository to use. Normally this is automatically set up by git annex initremote, but you can change it if needed.

remote.<name>.annex-borgrepo
    Used by borg special remotes, this configures the location of the borg repository to use. Normally this is automatically set up by git annex initremote, but you can change it if needed.

remote.<name>.annex-compute
    Used to identify compute special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-ddarrepo
    Used by ddar special remotes, this configures the location of the ddar repository to use. Normally this is automatically set up by git annex initremote, but you can change it if needed.

remote.<name>.annex-directory
    Used by directory special remotes, this configures the location of the directory where annexed files are stored for this remote. Normally this is automatically set up by git annex initremote, but you can change it if needed.

remote.<name>.annex-adb
    Used to identify remotes on Android devices accessed via adb. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-androiddirectory
    Used by adb special remotes, this is the directory on the Android device where files are stored for this remote. Normally this is automatically set up by git annex initremote, but you can change it if needed.

remote.<name>.annex-androidserial
    Used by adb special remotes, this is the serial number of the Android device used by the remote. Normally this is automatically set up by git annex initremote, but you can change it if needed, eg when upgrading to a new Android device.

remote.<name>.annex-s3
    Used to identify Amazon S3 special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-s3-restore-tier, annex.s3-restore-tier
    When using a Amazon S3 special remote, this specifies the tier to use when retrieving objects from deep storage. It can be set to "standard" (the default), "bulk", or "expedited".

remote.<name>.annex-s3-restore-days, annex.s3-restore-days
    When using an Amazon S3 special remote, this specifies how many days objects that are retrieved from deep storage should be left available. The default is 1 day.

remote.<name>.annex-glacier
    Used to identify Amazon Glacier special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-rclone
    Used to identify rclone special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-web
    Used to identify web special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-webdav
    Used to identify webdav special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-tahoe
    Used to identify tahoe special remotes. Points to the configuration directory for tahoe.

remote.<name>.annex-gcrypt
    Used to identify gcrypt special remotes. Normally this is automatically set up by git annex initremote.

    It is set to "true" if this is a gcrypt remote. If the gcrypt remote is accessible over ssh and has git-annex-shell available to manage it, it's set to "shell".

remote.<name>.annex-git-lfs
    Used to identify git-lfs special remotes. Normally this is automatically set up by git annex initremote.

    It is set to "true" if this is a git-lfs remote.

remote.<name>.annex-httpalso
    Used to identify httpalso special remotes. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-mask
    Used by mask special remotes, this is set to the name of the remote that is masked. If this is set to "true", then any remote with the right UUID will be used. Normally this is automatically set up by git annex initremote.

remote.<name>.annex-externaltype
    Used by external special remotes to record the type of the remote.

    Eg, if this is set to "foo", git-annex will run a "git-annex-remote-foo" program to communicate with the external special remote.

    If this is set to "readonly", then git-annex will not run any external special remote program, but will try to access things stored in the remote using http. That only works for some external special remotes, so consult the documentation of the one you are using.

remote.<name>.annex-hooktype
    Used by hook special remotes to record the type of the remote.

annex.web-options, remote.<name>.annex-web-options
    Options to pass to curl when git-annex uses it to download urls (rather than the default built-in url downloader).

    For example, to force IPv4 only, set it to "-4".

    Setting this makes git-annex use curl, but only when annex.security.allowed-ip-addresses is configured in a specific way. See its documentation.

    Setting this prevents git-annex from using git-credential for prompting for http passwords. Instead, you can include "--netrc" to make curl use your ~/.netrc file and record the passwords there.

annex.youtube-dl-options
    Options to pass to yt-dlp. For example if youtube is requiring cookies to download from it, use something like "--cookies-from-browser firefox"

    Some options may break git-annex's integration with yt-dlp. For example, the --output option could cause it to store files somewhere git-annex won't find them. Avoid setting here or in the yt-dlp config file any options that cause it to download more than one file, or to store the file anywhere other than the current working directory.

annex.youtube-dl-command
    Deprecated and unused. git-annex always runs "yt-dlp", since the "youtube-dl" command has been deprecated.

annex.aria-torrent-options
    Options to pass to aria2c when using it to download a torrent.

annex.http-headers
    HTTP headers to send when downloading from the web. Multiple lines of this option can be set, one per header.

annex.http-headers-command
    If set, the command is run and each line of its output is used as a HTTP header. This overrides annex.http-headers.

    Alternatively, a hook script can be installed in .git/hooks/http-headers-annex

annex.security.allowed-url-schemes
    List of URL schemes that git-annex is allowed to download content from. The default is "http https ftp".

    Think very carefully before changing this; there are security implications. For example, if it's changed to allow "file" URLs, then anyone who can get a commit into your git-annex repository could git-annex addurl a pointer to a private file located outside that repository, possibly causing it to be copied into your repository and transferred on to other remotes, exposing its content.

    Any url schemes supported by curl can be listed here, but you will also need to configure annex.security.allowed-ip-addresses to allow using curl.

    Some special remotes support their own domain-specific URL schemes; those are not affected by this configuration setting.

annex.security.allowed-ip-addresses
    By default, git-annex only makes connections to public IP addresses; it will refuse to use HTTP and other servers on localhost or on a private network.

    This setting can override that behavior, allowing access to particular IP addresses that would normally be blocked. For example "127.0.0.1 ::1" allows access to localhost (both IPV4 and IPV6). To allow access to all IP addresses, use "all"

    Think very carefully before changing this; there are security implications. Anyone who can get a commit into your git-annex repository could git annex addurl an url on a private server, possibly causing it to be downloaded into your repository and transferred to other remotes, exposing its content.

    Note that, since the interfaces of curl and yt-dlp do not allow these IP address restrictions to be enforced, curl and yt-dlp will never be used unless annex.security.allowed-ip-addresses=all.

    To allow accessing local or private IP addresses on only specific ports, use the syntax "[addr]:port". For example, "[127.0.0.1]:80 [127.0.0.1]:443 [::1]:80 [::1]:443" allows localhost on the http ports only.

annex.security.allowed-http-addresses
    Old name for annex.security.allowed-ip-addresses. If set, this is treated the same as having annex.security.allowed-ip-addresses set.

annex.security.allow-unverified-downloads
    For security reasons, git-annex refuses to download content from most special remotes when it cannot check a hash to verify that the correct content was downloaded. This particularly impacts downloading the content of URL or WORM keys, which lack hashes.

    The best way to avoid problems due to this is to migrate files away from such keys, before their content reaches a special remote. See git-annex-migrate(1).

    When the content is only available from a special remote, you can use this configuration to force git-annex to download it. But you do so at your own risk, and it's very important you read and understand the information below first!

    Downloading unverified content from encrypted special remotes is prevented, because the special remote could send some other encrypted content than what you expect, causing git-annex to decrypt data that you never checked into git-annex, and risking exposing the decrypted data to any non-encrypted remotes you send content to.

    Downloading unverified content from (non-encrypted) external special remotes is prevented, because they could follow http redirects to web servers on localhost or on a private network, or in some cases to a file:/// url.

    If you decide to bypass this security check, the best thing to do is to only set it temporarily while running the command that gets the file. The value to set the config to is "ACKTHPPT". For example:

     git -c annex.security.allow-unverified-downloads=ACKTHPPT annex get myfile

    It would be a good idea to check that it downloaded the file you expected, too.

remote.<name>.annex-security-allow-unverified-downloads
    Per-remote configuration of annex.security.allow-unverified-downloads.

annex.security.allowed-compute-programs
    This is a space separated list of compute programs eg "git-annex-compute-foo git-annex-compute-bar". Listing a compute program here allows compute special remotes that use that program to be enabled by git-annex enableremote or autoenabled.

CONFIGURATION OF ASSISTANT

annex.delayadd

    Makes the watch and assistant commands delay for the specified number of seconds before adding a newly created file to the annex. Normally this is not needed, because they already wait for all writers of the file to close it.

    Note that this only delays adding files created while the daemon is running. Changes made when it is not running will be added immediately the next time it is started up.

annex.expireunused
    Controls what the assistant does about unused file contents that are stored in the repository.

    The default is false, which causes all old and unused file contents to be retained, unless the assistant is able to move them to some other repository (such as a backup repository).

    Can be set to a time specification, like "7d" or "1m", and then file contents that have been known to be unused for a week or a month will be deleted.

annex.fscknudge
    When set to false, prevents the webapp from reminding you when using repositories that lack consistency checks.

annex.autoupgrade
    When set to ask (the default), the webapp will check for new versions and prompt if they should be upgraded to. When set to true, automatically upgrades without prompting (on some supported platforms). When set to false, disables any upgrade checking.

    Note that upgrade checking is only done when git-annex is installed from one of the prebuilt images from its website. This does not bypass e.g., a Linux distribution's own upgrade handling code.

    This setting also controls whether to restart the git-annex assistant when the git-annex binary is detected to have changed. That is useful no matter how you installed git-annex.

annex.autocommit
    Set to false to prevent the git-annex assistant, git-annex assist, and git-annex sync from automatically committing changes to files in the repository.

    To configure the behavior in all clones of the repository, this can be set in git-annex-config(1).

annex.startupscan
    Set to false to prevent the git-annex assistant from scanning the repository for new and changed files on startup. This will prevent it from noticing changes that were made while it was not running, but can be a useful performance tweak for a large repository.

annex.listen
    Configures which IP address the webapp listens on. The default is localhost. Can be either an IP address, or a hostname that resolves to the desired address.

annex.port
    Configures which port address the webapp listens on. The default is to pick an unused port.

CONFIGURATION VIA .gitattributes
The key-value backend used when adding a new file to the annex can be configured on a per-file-type basis via .gitattributes files. In the file, the annex.backend attribute can be set to the name of the backend to use. (See git-annex-backends(1) for information about available backends.) For example, this here's how to use the WORM backend by default, but the SHA256E backend for ogg files:

 * annex.backend=WORM
 *.ogg annex.backend=SHA256E

There is a annex.largefiles attribute, which is used to configure which files are large enough to be added to the annex. Since attributes cannot contain spaces, it is difficult to use for more complex annex.largefiles settings. Setting annex.largefiles in git-annex-config(1) is an easier way to configure it across all clones of the repository. See git-annex-matching-expression(1) for details on the syntax.

The numcopies and mincopies settings can also be configured on a per-file-type basis via the annex.numcopies and annex.mincopies attributes in .gitattributes files. This overrides other settings. For example, this makes two copies be needed for wav files and 3 copies for flac files:

 *.wav annex.numcopies=2
 *.flac annex.numcopies=3

These settings are honored by git-annex whenever it's operating on a matching file. However, when using --all, --unused, or --key to specify keys to operate on, git-annex is operating on keys and not files, so will not honor the settings from .gitattributes. For this reason, the git annex numcopies and git annex mincopies commands are useful to configure a global default.

Also note that when using views, only the toplevel .gitattributes file is preserved in the view, so other settings in other files won't have any effect.

EXIT STATUS
git-annex itself will exit 0 on success and 1 on failure, unless the --size-limit or --time-limit option is hit, in which case it exits 101.

A few git-annex subcommands have other exit statuses used to indicate specific problems, which are documented on their individual man pages.

ENVIRONMENT
These environment variables are used by git-annex when set:

GIT_WORK_TREE, GIT_DIR
    Handled the same as they are by git, see git(1)

GIT_SSH, GIT_SSH_COMMAND
    Handled similarly to the same as described in git(1). The one difference is that git-annex will sometimes pass an additional "-n" parameter to these, as the first parameter, to prevent ssh from reading from stdin. Since that can break existing uses of these environment variables that don't expect the extra parameter, you will need to set GIT_ANNEX_USE_GIT_SSH=1 to make git-annex support these.

    Note that setting either of these environment variables prevents git-annex from automatically enabling ssh connection caching (see annex.sshcaching), so it will slow down some operations with remotes over ssh. It's up to you to enable ssh connection caching if you need it; see ssh's documentation.

    Also, annex.ssh-options and remote.<name>.annex-ssh-options won't have any effect when these envionment variables are set.

    Usually it's better to configure any desired options through your ~/.ssh/config file, or by setting annex.ssh-options.

GIT_ANNEX_VECTOR_CLOCK
    Normally git-annex timestamps lines in the log files committed to the git-annex branch. Setting this environment variable to a number will make git-annex use that (or a larger number) rather than the current number of seconds since the UNIX epoch. Note that decimal seconds are supported.

    This is only provided for advanced users who either have a better way to tell which commit is current than the local clock, or who need to avoid embedding timestamps for policy reasons.

Some special remotes use additional environment variables
    for authentication etc. For example, AWS_ACCESS_KEY_ID and GIT_ANNEX_P2P_AUTHTOKEN. See special remote documentation.

FILES
These files are used by git-annex:

.git/annex/objects/ in your git repository contains the annexed file contents that are currently available. Annexed files in your git repository symlink to that content.

.git/annex/ in your git repository contains other run-time information used by git-annex.

~/.config/git-annex/autostart is a list of git repositories to start the git-annex assistant in.

SEE ALSO
More git-annex documentation is available on its web site, <https://git-annex.branchable.com/>

If git-annex is installed from a package, a copy of its documentation should be included, in, for example, /usr/share/doc/git-annex/.

git-annex-shell(1)

git-remote-annex(1)

git-remote-tor-annex(1)

AUTHOR
Joey Hess <id@joeyh.name>

<https://git-annex.branchable.com/>